Publicité
Battery iD
Traxxas recommended
battery packs are equipped
with Traxxas Battery iD. This
exclusive feature allows
Traxxas battery chargers (sold
separately) to automatically
recognize connected battery
packs and optimize the
charge settings for the
battery. This eliminates
the need to worry over
charger settings and menus
for the easiest and safest
charging solution possible.
Visit Traxxas.com to learn
more about this feature and
available Traxxas iD chargers
and batteries.
Battery Compartment Specs:
• 197mm (7.75") long
x 51.5mm (2.03") wide
• Height with stock strap:
45mm (1.77")
• Height with included
hold-down spacer:
28.5mm (1.12")
4 4
14 • X-MAXX
TRAXXAS TQ
RADIO & VELINEON POWER SYSTEM
i
INSTALLING THE BATTERY PACKS
1
1. Pull out on the battery hold-down using the two release tabs and lift the
hold-down up.
2. Insert a fully charged battery into the battery compartment with the High
Current Connector positioned toward the front of the model.
3. Lower the battery hold-down and push it in toward the center of the truck
to snap it closed.
4. Repeat for the opposite battery.
Note: The battery compartment includes foam spacers
to accommodate the Traxxas 6700mAh 4s battery packs
(part #2890X). When using Traxxas 5000mAh 3s battery
packs (part #2872X), install the battery pack spacers
onto the hold-downs (they simply snap into place); you
will also need to use the included foam spacer blocks.
The Traxxas High-Current Connector
Your model is equipped with the Traxxas High-Current
Connector. Standard connectors restrict current ow
and are not capable of delivering the power needed
to maximize the output of the VXL-8s. The Traxxas
connector's gold-plated terminals, with large contact
surfaces, ensure positive current ow with the least
amount of resistance. Secure, long-lasting, and easy to grip, the Traxxas connector
is engineered to extract all the power your battery has to give.
www.modellmarkt24.ch
2
Publicité
