Publicité
QUICK START: GETTING UP TO SPEED
The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom
corners of Quick Start pages.
1. Read the safety precautions on page 4
For your own safety, understand where carelessness and misuse
could lead to personal injury and product damage.
2. Charge two battery packs • See page 13
Your model requires two identical LiPo battery packs and a
compatible battery charger (sold separately). Never use a NiMH or
NiCad charger to charge LiPo battery packs.
3. Install batteries in the transmitter • See page 13
The transmitter requires 4 AA alkaline batteries (sold separately).
4. Install the battery packs in the model • See page 14
Your model requires two fully charged battery packs
(sold separately).
5. Turn on the radio system • See page 15
Make a habit of turning the transmitter on rst and o last.
6. Check servo operation • See page 16
Make sure the steering servo is working correctly.
7. Range test the radio system • See page 16
Follow this procedure to make sure your radio system works properly
at a distance, and that there is no interference from outside sources.
8. Detail your model • See sidebar, page 10
Apply other decals if desired.
9.
Drive your model • See page 21
Driving tips and adjustments for your model.
10. Maintaining your model • See page 26
Follow these critical steps to maintain the performance
of your model and keep it in excellent running condition.
www.modellmarkt24.ch
The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your model.
Look for the Quick Start
logo at the bottom of
Quick Start pages.
X-MAXX • 9
Publicité
