Publicité
12 I
18. Slide the clamp around the top of the
chimney onto the top edge of the rain flange.
Tighten and lock the clamp firmly so that there
are no gaps left in the top edge of the rain
flange.
1
20. Finally, install the cover strips on the transport supports at the
front and rear with the 6 brown terrace screws. 2 screw per beam
85
12 K
19. Lock the rain cap in place by turning it
slightly clockwise.
NOTE! Do not tighten the rain cap too tightly.
The rain cap must be removed during the clea-
ning of the chimney.
2
Publicité
