Publicité
HARVIA LEGEND PRO PE11 -ELECTRIC HEATER INSTALLATION AND USAGE
Note! Do not connect the sauna to the main power before you
The connecting cable to the sauna must be 5x2.5mm² and the fuses 3x16A.
Harvia Cilindro is delivered in a separate package (the heater package can be found inside the sauna).
There are more detailed instructions for installing and using the heater inside the package.
1
1. Remove the band around the heater
package and carefully remove the cardboard
box from the top because wires are already
attached to the heater.
3.
Put sauna heater stones in place. See the
manual included in the sauna heater package for
more detailed instructions.
74
have installed heater.
4. Place stool in place front of the bench.
1
2. Place the heather plate on the
floor according to the dimensions of
the picture.
Place heater on top of the
hearth plate.
5
2
Publicité
