Publicité
1. Legend heater has 4 chimney outlets. Check
that the chimney outlet on top of the heater is
free and the other three are blocked.
If necessary, move the protective cover.
3. Visually check that the chimney outlet on
the heater is in line with the hole in the roof.
80
5
2. Place the Protective bedding on the floor
according to the dimensions of the picture.
Place heater on top of the Protective bedding.
The protective bedding and the heater have
feet which can be adjusted to set the heater
in a straight position using the spirit level.
4. Install the smoke pipe in the outlet on top
of the heater. Place the smoke pipe guard
around the smoke pipe.
5
7
12 B
6
Publicité
