Publicité
76
HARVIA CILINDRO - USAGE
THE SAUNA HEATER MUST NOT BE USED WITHOUT STONES. IF THE
SPACE RESERVED FOR STONES IS NOT FULL, IT WILL CAUSE A FIRE
HAZARD!
When the control unit is connected to the power supply the control unit is in standby mode and
ready for use. I/O buttons' background lights glow on the control panel.
WARNING! Before switching the heater on always check that there isn't anything on top of the
heater or inside the given safety distance
Heater and/or lighning on
Start the heater by pressing the heater I/O button on the control panel.
When the heater starts, the top row of the display will show the set temperature and the bot-
tom row will show the set on time for five seconds.
When the desired temperature has been reached in the sauna room, the heating elements
are automatically turned off. To maintain the desired temperature, the control unit will automa-
tically turn the heating elements on and off in periods.
Publicité
