Télécharger Imprimer la page

Harvia Legend Mode D'emploi page 79

Publicité

INSTALLATION AND USAGE OF LEGEND HEATER AND STEEL CHIMNEY
Harvia Legend -burning heater and steel chimney are delivered in a separate package (found
inside the sauna). You will find more detailed instructions for use inside the package.
BEFORE USING THE SAUNA AND PUTTING THE STONES INTO PLACE, A WOOD-BURN-
ING SAUNA HEATER IS PREHEATED OUTDOORS ON A NON-COMBUSTIBLE BASE.
Before preheating, remove all protective plastic and stickers from the sauna heater.
The purpose of preheating is to remove all protective agents from the sauna heater,
such as harmful solvents and fumes released from the paint. Using the connecting
pipe provided with the sauna heater in the top connection of the heater improves
draught while preheating the stove. Filling the firebox with wood 1–2 times is
enough for preheating. After heating, the material that has come loose from the
space reserved for stones in the sauna heater is removed using a wire brush, for
example. The painted outer surface of the sauna heater must not be scrubbed or
wiped. Water must not be thrown on the sauna heater during preheating. Attach the
sauna heater and add the stones in accordance with the instructions. You can find
more information in the instructions of the sauna heater.
Installing the flue
The sauna comes with a pre-dimensioned chimney suitable for the heater. The instructions for
the chimney and the Kirami instructions differ slightly, as the chimney parts are pre-dimension-
ed for the sauna. The purpose of the steel flue is to lead the combustion gases coming from the
fireplace safely outside. Install the flue precisely in the right place in accordance with the instruc-
tions below. In the image, you can see the parts of the flue and how to put them in place.
Chimney fire
A chimney fire refers to the soot and combustion residue accumulated in the flue burning in an
uncontrollable fire. A fire may be lit due to high heat, wind or a spark. You can avoid a chimney
fire by ensuring that the flue is swept regularly and only burning dry wood with sufficient air in
the fireplace.
If you detect a chimney fire in the flue, close the doors of the ash drawer and the firebox. A
chimney sweeper must check the condition of the flue and the sauna heater after a chimney fire
before next use.
BEFORE INSTALLING THE HEATER
79

Publicité

loading