CAUTION
The unit can cause dangers, if is not used as intended.
Use the unit exclusively as intended.
●
Observe the procedures described in these operating instructions.
●
Claims of any kind caused by damage by unintended use shall be excluded.
The risk shall be borne sole by the user.
LIMITATION OF LIABILITY
All technical information, data and notes on the installation, the operation and the care contained in these operating instructions correspond to
the last status before printing, and are rendered under consideration of our previous experience and to the best of knowledge.
No claims may be derived from the specifications, illustrations and descriptions in these instructions.
The manufacturer does not assume any liability for damage caused by:
Non-observation of the instructions
●
Unintended use
●
Improper repairs
●
Technical modifications
●
Use of unapproved spare parts
●
Translations are carried out to the best of knowledge. We do not assume any liability for translation mistakes. The original German text shall be
binding only.
AFTER-SALES SERVICE
If your Graef unit is damaged, please contact your dealer or the Graef Customer Service at +49 (2932) 9703677 or write an e-mail to ser-
vice@graef.de.
IMPORTANT!
If possible, keep the original packaging during the guarantee period of the unit in order to be able to pack the unit properly in case of guar-
antee.
UNPACKING
When unpacking the unit, proceed as follows:
Remove the unit from the box.
●
Remove the packaging parts.
●
Remove any stickers on the unit. Do not remove the type plate!
●
DISPOSAL OF THE PACKAGING
The packaging protects the unit against transport damage. The packaging materials are selected according to the environmental compatibility
and disposal-related aspects and can therefore be recycled.
The return of packaging into the material cycle saves raw material and reduces the waste volume. Dispose of the packaging material no longer
needed at collection points for the "Green Dot" recycling system (in Germany).
DISPOSAL OF THE UNIT
At the end of its service life, this product cannot be disposed of in normal domestic waste. The symbol on the product and in the operating instruc-
tions point out to this fact. Reuse the materials according to their marking. With the reuse, recycling or other forms of recycling of old equipment,
you make an important contribution to the protection of our environment. Please ask your municipal administration for the disposal point.
REQUIREMENTS ON THE INSTALLATION LOCATION
For safe and faultless operation of the unit, the following requirements of the installation location have to be met:
The unit has to be placed on a solid, flat, horizontal, and non-slipping surface with a sufficient weight-carrying capacity.
●
Make sure that the unit cannot topple over.
●
Choose the location in such a way that children cannot reach the connecting cable of the unit.
●
Do not place the unit on hot surfaces, such as hotplates, or near them.
●
Never use the unit outdoors, and always keep it in a dry place.
●
The unit is not designed for installation in a wall or a built-in cupboard.
●
Do not set up the unit in a hot, wet or moist environment.
●
The socket has to be easily accessible so that the power cable can be removed easily in case of emergency.
●
ELECTRICAL CONNECTION
For safe and fault-free operation of the unit, the following requirements have to be met during the electrical connection:
DE
EN
FR
NL
IT
PL
19