Cleaning
WARNING! RISK OF ELECTRIC SHOCK!
►
Before you start to clean the hand blender, ALWAYS unplug the appliance
from the mains power socket.
Under no circumstances may the motor unit 4 be cleaned by immersing it in
water or holding it under running water.
WARNING! RISK OF INJURY!
Handle the extremely sharp blade 7 with caution as it can cause injuries.
►
Reassemble the liquidiser after use and/or cleaning so that you do not
injure yourself on the exposed blade 7.
Keep the blade 7 out of the reach of children.
NOTICE
WARNING! PROPERTY DAMAGE!
►
Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
1) Disconnect the power cable.
2) Clean the motor block 4 and the whisk holder 0 with a moist cloth.
Ensure that water cannot permeate through the openings on the motor block 4.
For stubborn stains, put some mild detergent on the cloth. Wipe detergent
residues off with a damp cloth.
3) Clean the hand blender 5, the bowl lid 6, the bowl 8 with lid 9, the
whisk q, the measuring beaker w with combined lid/base
blade 7 thoroughly in soapy water and then rinse off the soap with fresh
water. Rinse off any remaining detergent afterwards with fresh water.
4) Dry everything well with a dish towel and ensure that the appliance is com-
pletely dry before re-use.
│
GB │ IE
■
12
The measuring beaker w with combined lid/base
bowl 8 with lid 9 and the blade 7 are dishwasher-safe.
, whisk q,
a
a
and the
SSMS 600 E6