SilverCrest 497309 2204 Mode D'emploi page 13

Hand blender and whisk operation
NOTE
Fill the measuring beaker w only up to the 300 ml mark with food/liquids.
►
Once you have assembled the appliance as required:
1) Insert the plug into the mains power socket.
2) Hold down the switch
the speed regulator 1 towards "Max" to increase the speed. Turn the speed
regulator 1 towards "Min" to decrease the speed.
3) Hold down the turbo-switch 3 to process the food at a high speed. By
pressing the turbo-switch 3, the maximum processing speed is immediately
available to you.
4) Once you are done processing the food, simply release the pressed switch
NOTE
If you want to whip cream with a whisk q, hold the container at an angle
►
while whipping. This way, the cream will stiffen more quickly. Make sure
that no cream splashes out during whipping. Use the turbo-switch 3.
NOTE
Using the shredder
NOTE
Fill the bowl 8 only up to the 500 ml mark
►
and only up to the 300 ml mark
Once you have assembled the shredder:
1) Insert the plug into the mains power socket.
2) Place the bowl 8 on a dry, level surface. The bowl 8 has silicon feet which
stop the bowl 8 does not slip easily.
3) Hold down the switch
the speed regulator 1 towards "Max" to increase the speed. Turn the speed
regulator 1 towards "Min" to decrease the speed.
│ GB │ IE
■ 10
2/3.
If you hear unusual noises during operation, e.g.
squeaking or similar, apply a small amount of neutral
cooking oil to the drive shaft of the hand blender 5.
2 to process the food at a normal speed. Turn
when processing liquids.
2 to process the food at a normal speed. Turn
when processing food
SSMS 600 E6