Publicité
Les langues disponibles
Les langues disponibles
3 Scope of delivery
• 1x Bus coupler (see: order)
If you have configured your product with optional elements, these elements
are already assembled on the product.
• 1x safety information
4 Transport and storage
4.1 Transporting the product
Hazards during transportation
• Proceed with caution and observe the information on the packaging when un-
loading and transporting the packaged product to the destination.
4.2 Storing the product
Damage due to incorrect storage
Unfavorable storage conditions can result in corrosion and material deteriora-
tion.
• Protect the product from direct sunlight and UV radiation.
• Keep the product in its packaging until the time of installation.
Elastomer parts
Pneumatic components typically have elastomer seals that are subject to a con-
stant process of aging.
• Products that have been stored for longer than 2 years have a shorter service
life.
• The aging process can be accelerated by heat and light (UV rays).
If you are unsure about the status of the elastomer seals, Get in touch with our
contact address. See back cover.
4.3 Returning the product
• Before returning the product: Get in touch with our contact address. See back
cover.
• Observe the storage conditions until such time as you return the product.
5 Product description
5.1 Labeling and identification
Name plate
7
8
6
Fig. 1: Name plate example
1 Date of manufacture in the format yy-
Www, yy=year, ww=week
3 Data matrix code
5 Manufacturer address
7 Word mark AVENTICS
9 Password
Product identification
The ordered product is clearly identified by the material number. The material
number can be found in these locations:
• On the name plate.
AVENTICS™ EtherCAT | 570089-BAL-AA | English
9
1
2
3
4
5
2 Material number
4 QR code
6 MAC address
8 SKU (part number)
CE mark
This product complies with the Electromagnetic Compatibility (EMC) Di-
rective 2014/30/EU and its amendments. The product is labeled with CE
identification. The declaration of conformity is available on request.
Please provide the material number and serial number for the correspond-
ing products.
5.2 Product overview
11
10
9
Fig. 2: XVES product overview
1 LEDs
3 Screws
5 Pin assignment X1S
7 China RoHS/EFUP
9 Switch SW2
11 Name plate
13 X7E1 plug connector
6 Assembly and installation
6.1 Planning
6.1.1 Installation conditions
Product-specific requirements
• Ensure that power packs are equipped with safe isolation in accordance with
EN 61558 and that the power circuits are therefore SELV/PELV power circuits
in accordance with IEC 60364-4-41 (accident protection).
• Power supply equipped with a DC fuse that can interrupt a current of 6.67 A
within max. 120 s.
• Ensure that the supply voltage of the power pack is always < 300 V AC (exter-
nal conductor - neutral conductor).
For use in North America and/or Canada: Use an isolated power source that
meets one of the following requirements:
• Power circuit with limited energy in accordance with UL/CSA 61010-1/ UL/
CSA 61010-2-201.
• Limited power source (LPS) in accordance with UL/CSA 60950-1.
• Class 2 power source that complies with the National Electrical Code (NEC),
NFPA 70, clause 725.121 and the Canadian Electric Code (CEC), Part I, c22.1.
Example: Class 2 transformer or class 2 power source in accordance with UL
5085-3/ CSA-C22.2 no. 66.3 or UL 1310/CSA-c22.2 no. 223)
14
13
12
3
6
7
8
5
4
2 Address
4 Information on the electrical voltage
6 CE mark
8 Switch SW1
10 Electrical connection for the valve
system
12 X7E2 plug connector
14 X1S plug connector
1
2
16
Publicité
