Publicité
Les langues disponibles
Les langues disponibles
34 | English
Symbols and their meaning
3 601 M47 0..
Observe the dimensions of the saw
blade. The hole diameter must match the
tool spindle without play. If it is neces-
sary to use reducers, ensure that the di-
mensions of the reducer are suitable for
the base blade thickness and the saw
3 601 M47 0B.
blade hole diameter, as well as the tool
spindle diameter. Wherever possible, use
25,4
the reducers provided with the saw
blade.
The saw blade diameter must match the
information specified on the symbol.
Shows the rotational direction of the SDS
bolt for tightening the saw blade (anti-
clockwise) and for loosening the saw
blade (clockwise).
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
This product is a consumer laser product in accordance with
EN 50689.
®
With the Bluetooth
Low Energy Module GCY 42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
less technology.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Slide device
(2)
Chip ejector
(3)
Transport handle
Depth stop adjusting screw
(4)
(5)
Guide roller
1 609 92A 8KY | (07.03.2023)
(6)
Cover for GCY 42 Bluetooth
(7)
Lock-off function for on/off switch
(8)
On/off switch
(9)
Handle
(10)
Laser protection cap
(11)
Protective guard
(12)
Retracting blade guard
(13)
Saw blade
(14)
Saw table extension
(15)
Fence
(16)
Adjustable fence
(17)
Saw table
(18)
Clamping lever of the saw table extension
(19)
Scale for mitre angles
(20)
Insert plate
(21)
Locking clamp
(22)
Locking knob for various mitre angles
(23)
Mitre pre-setting lever
(24)
Tilt protector
(25)
Laser warning label
(26)
Angle indicator for mitre angles
(27)
Detents for standard mitre angles
(28)
Mounting holes
(29)
Recessed handles
(30)
Screw clamp
(31)
Standard bevel angle stops 45°, 22.5° and 33.9°
(32)
Scale for bevel angle
(33)
Angle indicator for right-hand bevel angle range
(34)
Clamping handle for various bevel angles
(35)
Depth stop
(36)
Locking screw for slide device
(37)
User interface
(38)
Transport safety lock
(39)
Rechargeable battery
(40)
Rechargeable Battery release button
(41)
Angle indicator for left-hand bevel angle range
(42)
Chip deflector
®
wire-
(43)
Stop for standard 0° bevel angle
(44)
Hex key (5 mm/2.5 mm)
(45)
Holes for screw clamp
(46)
Length stop
(47)
Locking screw for length stop
(48)
Clamping screw for length stop
(49)
Temperature indicator (user interface)
(50)
ECO mode indicator (user interface)
(51)
Power tool status indicator (user interface)
(52)
Laser indicator (user interface)
®
Low Energy Module
a)
a)
Bosch Power Tools
Publicité
