Bezzera MATRIX DUO Manuel D'instructions page 54

BEZZERA MATRIX-DUO
MOD.
5.17 Stand-by, Forced Stand-By and
Technical menu
Warnings: the Matrix and Duo machines are
equipped with a stand-by function that sends the
machine into an idle state after 30 minutes of in-
activity.
However, if the auto on off function is activated,
the automatic stand-by function is excluded.
It is possible to send the machine to standby,
making it return to the initial screen called "sleep-
ing" by using the relevant button on the side pop-
up menu.
1
During the stand-by phase the machine switches
off all the heating elements allowing the reduc-
tion of energy consumption to ensure safety dur-
ing inactivity.
In this phase it is also possible to access the tech-
nical menu by clicking on the appropriate icon on
the right side of the screen.
This function is password-protected to the author-
ised technicians.
Warnings: any changes made in the technical
menu may change the performance of the ma-
chine by deviating from the optimum.
2
6 - MAINTENANCE
Follow the maintenance instructions indicated be-
low to operate the machine correctly.
6.1 Safety rules
Do not use water jets on the machine. Discon-
nect the machine from the power line by turning
the lever of the omnipolar disconnecter, of the
electric mains, to the "0" rest position, remove the
plug and close the water interception valve before
carrying out maintenance and/or cleaning opera-
tions. If the machine malfunctions, do not attempt
to repair it yourself and immediately contact tech-
nical support. In case of damage to the power
supply cord, turn off the machine immediately,
close the water and contact the technical assi-
stance service. Avoid replacing it autonomously.
Perform cleaning/maintenance with the machine
cold, preferably wearing protective gloves.
6.2 – Cleaning the machine
Warnings: For the best results and in compliance
with current regulations, change the water in the
boiler and pipes when starting the machine every
day.
This advice is for indication purposes only: main-
tenance and cleaning schedules depend on the
use of the machine.
After each use
1) Clean the steam wand.
2) Clean the filter-holder and filters.
Daily
1) Clean the cup rack and drip tray.
2) Clean the bodywork.
3) Clean the group gasket with the brush sup-
plied.
4) Wash the group.
5) Immerse the filter-holders and filters in boiling
water for a few minutes to any coffee oils and
use a cloth or sponge to remove it.
54