7. Preparing for pumping
Warning
16
16
l Mains operation:
Follow the exact order of the steps.
l Only use the mains adapter supplied
with the Swing Flex / Swing Maxi Flex.
l Make sure the voltage of the mains
adapter is compatible with the
power source.
i
Info
l You can operate the
Swing Flex / Swing Maxi Flex breast
pump via battery or mains.
l Battery operation:
The batteries do not need to be
removed when the mains adapter
is used for pumping.
l Regularly check the condition of
the batteries in the motor unit.
l If Swing Flex / Swing Maxi Flex will
remain unused for a longer period
of time, remove the batteries from
the battery compartment.
l Batteries last for 4 – 6 pumping
sessions (approx. 1 ½ hours
pumping time).
7.1 Mains operation
1
Plug the mains adapter cord
into the motor unit.
7.2 Battery operation
1
Open the battery compartment
on the back in the direction of
the arrow.