Cleaning Tubing; Cleaning The Motor Unit - Medela Swing Flex Mode D'emploi

6.5 Cleaning tubing

1
I No visible residues
No cleaning needed.
l With visible residues
1. Rinse tubing in cool water
2. Wash tubing in warm, soapy water
3. Rinse tubing with clear water
4. Shake out water droplets
5. Hang to air dry
Do not sanitise the tubing.

6.6 Cleaning the motor unit

1
To clean the motor unit, wipe the
housing with a clean, damp (not wet)
cloth. You may use drinking-quality
water and a basic washing-up liquid
or a non-abrasive detergent.
Note
l If the individual components of the
pump set are cleaned in a dishwasher,
parts may be discoloured by food
pigments. This has no impact on
the function.
l The membrane at the connector
prevents the milk from flowing into
the tubing, however, inspect the
tubing after each pumping session
for visible residues. If there are
visible residues in the tubing, follow
the instructions in chapter 6.5.
2
Additionally you may use an
alcohol-based disinfecting agent.
15 15