Checking The Floor Where The Appliance Will Be Placed - Palazzetti KP 20 Manuel D'installation, D'utilisation Et De Maintenance

5.1 transportation
Make sure that the lifting carriage has a
payload higher than the weight of the
appliance to be lifted. The full responsi-
bility of the lifting of loads lies with the
person handling the lifting equipment.
Ensure wood or timber floors are prop-
erly protected in order to prevent the
weight of the appliance from damag-
ing them during movement.
During lifting, avoid jerking or abrupt movements.
Pay attention to overbalancing.
5.2 Checking the floor where the
appliance will be placed
Check the load capacity of the floor slab.
If a floor is not suitable for supporting the
weight of the appliance, install appropriate steel
plates (a - Fig. 12) or concrete base (a - Fig.
13) equipped with
mesh (B - Fig. 13) to distribute the weight.
For the dimensions of the plates and
the concrete base, use a qualified
technician.
A
004778640 - 10/02/2021
10x10x6 electro-welded
10 mm
Fig. 12
ITALIANO ENGLISH
A
B
FRANÇAIS
Fig. 13
75