Reset Display - Palazzetti KP 20 Manuel D'installation, D'utilisation Et De Maintenance

Configurations
Room thermostat
Room sensor
Coil accumulator
Non-coil accumulator
Configu-
Description
ration
1 Room thermostat
2 Room sensor
3 Accumulator with coil
Accumulator without
4
Example of configuration 1 - Room thermostat:
Configurations
Room thermostat
Room sensor
Coil accumulator
Non-coil accumulator

Reset display

The display needs to be reset.
Proceed?
YES
Press "YES" to proceed.
92
Fig. 51
Default
coil
Fig. 52
NO
Fig. 53
The display re-sets for a few seconds.
The logo and a green progress bar appear on the
display:
At this point the home screen of the configura-
tion chosen is shown.
OFF
70
45,8 °C
This screen refers to the boiler hot water flow
temperature.
Press on "WateR". You go to the following view:
OFF
Press on "thermostat" to return to the previous
screen.
Fig. 54
°C
WATER
Fig. 55
Thermostat
Fig. 56
004778640 - 10/02/2021