Eurocave Vin au Verre 8.0 Mode D'emploi page 18

7. CONFIGURING THE APPLIANCE
When you switch on Vin au Verre 8.0, the INSTALLATION screen
displays, allowing you to configure it.
A. Setting the language, units and currency
1
From the welcome screen, access the Settings Menu
Enter your "Manager" password and press
Press the arrow to display the 2 nd settings screen
Then select
2 Choose your language
scrolling with the arrows
FRANÇAIS
Then continue to the next step by
pressing
3 Choose the unit of temperature
by scrolling with the arrows
°C
Then continue to the next step by
pressing
B. Setting the date and time
1 From the welcome screen, access the Settings Menu
Enter your "Manager" password and press
Press the arrow to display the 2 nd settings screen
Then select
C. Configuring passwords
The "Waiter password" will be requested for locking/unlocking
The "Manager password" will be requested for locking/unlocking
When using the appliance for the first time, the default password is: 0000.
If you forget your password, contact customer service in France or your stockist if you are abroad.
1
From the welcome screen, access the Settings Menu
Press the arrow to display the 2 nd settings screen.
Then select .
2 To configure the "Manager password":
Enter the current password then
enter the new password. Enter it
Ancien
Old password
a second time to confirm, and
mot de passe
Nouveau New password
validate
mot de passe
Confirmez votre Confirm your
password
mot de passe
Tip: It is possible to have one single password to manage all the functions.
EN
To do this, simply enter the same password for the manager and waiter.
-12-
The installer carries out this first installation by following the steps
shown on the screen.
4
Choose the unit of volume by
scrolling with the arrows
cl
Changing the unit of
volume will reset the
volume of the 24
measures by default.
by
Then continue to the final step by
pressing
5 Choose your currency
To do so, click the text bar. Four
choices of currency will appear.
€
Delete the pre-filled currency (€)
by pressing the
select your currency: €, $, ¥, £.
If it does not appear in the list, press
currency manually (3 characters maximum): DIN, RMB, MXN,
CHF...
Then validate
The language, unit of temperature, volume and currency
settings are finished.
2 Set the hours/minutes using the
keyboard on the screen, then
HH MM DD MM YYYY
HH MM DD MM YYYY indicate the date (day/month/
year) and validate
N.B. You must delete the existing
content with the
entering a new value.
Vin au Verre 8.0.
and accessing the Settings Menu .
. Enter your "Manager" password and press .
3 To configure the "Waiter Password":
Press the arrow
current password then enter the
Ancien
Old password
new password. Enter it a second
mot de passe
New password
Nouveau
time to confirm, and validate
mot de passe
Confirmez votre Confirm your
password
mot de passe
D. Locking the appliance
• The equipment is mechanically locked with the lock located above
the doors.
• Measure serving is locked with the manager or waiter password.
E. Calibration
1
From the welcome screen, access the Settings Menu
2
key and
, and enter your
3
F. Customising your equipment
1. Customising the standby screen
By default, the screen changes to standby mode (reduced brightness)
after 30 seconds.
key before
You can opt for another standby screen. To do so:
• From the welcome screen, access the Settings Menu
• Select
• Activate the customised screen by entering your manager
password.
By default, the customised screen has the EuroCave Professional logo.
It is also possible to have your own standby screen. To customise the
standby screen, contact your stockist who will explain the procedure
to follow.
. Enter the
From the welcome screen, select
password. The appliance is locked when the picture of the key is red.
To unlock, proceed in the same way, the picture of the key will be green
to indicate that measure serving is activated.
Enter your "Manager" password and press
Then select
Install a wine bottle filled with 4
water in any bottle holder, SAISIR LE VOLUME SERVI ENTER THE VOLUME SERVED
IN THE MEASURING JUG DANS LE VERRE DOSEUR
ensuring that you insert the tube
into the bottle.
To do so, push the bottle
upwards, then push forwards
whilst maintaining it in the upper
position.
Remove the bottle of water from the appliance.
Calibration is finished.
There is no need to repeat the process for the other
Place the graduated measuring
wine dispensing taps, one single calibration is
cylinder under the wine
sufficient.
dispensing taps.
Press one of the 3 measures on
the wine dispensing tap of the
bottle of water installed
2. Customising the front
Using the marker pen supplied with the product, you can write on the
front of your appliance.
, enter your manager or waiter
.
Observe the volume that
appears in the measuring
cylinder and enter the vol-
ml ume served in millimetres
on the screen.
Then validate
EN
-13-