Eurocave Vin au Verre 8.0 Mode D'emploi page 17

5. INSTALLING THE GLASS HOLDER
The glass holders allow you to serve several glasses at the same
time (up to 4 glasses).
There are 2 glass holders supplied with the product: 1 per door.
Fitting the glass holders is optional.
The glass holders are in 2 parts: a metal part to be fastened to the
product and a transparent part to be fitted to the metal part.
To install the metal part of the glass holder:
• Using a 4mm Allen key (supplied), slightly unscrew without
dismantling (only perform one turn) the 2 screws located on the
top of each door (2)
• Insert the metal part of the glass holder into the slot (3)
• Screw the 2 screws back on (4)
To fasten the transparent part:
Simply install the outside part of the door (2) first, then inside (3) (see
diagram below), and lower (4).
It is possible to choose the height of the transparent part according to
the type of glasses used.
Position your glasses as close as possible to the wine dispensing tap
to optimise the quality of the wine served.
6. DESCRIPTION OF THE SCREEN AND MENUS
ACTIONS POSSIBLE FROM THE WELCOME SCREEN
By default, the screen places itself on
standby after 30 seconds of inactivity.
To leave standby mode, touch the screen's
surface.
To lock / unlock
Your "Manager" or "Waiter" password will be
requested.
• The picture of the key is red: Vin au Verre 8.0
is locked, no service is possible.
• The picture of the key is green: Vin au Verre
8.0 is in operation
To switch on/off the lights of the entire product
(wine dispensing taps and compartments)
Shortcut to Daily Cleaning Menu. This indicator
light will flash to remind you to carry out cleaning
Shortcut to Bottle Replacement Menu for
replacing a bottle with one of the same label
Access to the Settings Menu.
Your "Manager" password will be requested
EN
-10-
4
x1
3
2
16 ° C
6 ° C 15cl
6cl
3cl
1
C
6 ° C 15cl 16 °
3cl 6cl
16 ° C
6 ° C
6cl 15cl
3cl
2
3
5
6°C 18°C
3cl 6cl 12cl
• Access to the online help platform
°C: Display of the temperature setting in both
6°C/18°C
compartments.
Can also be set in Fahrenheit
Display of the level of wine remaining in each
bottle in real time
Display of measures if all the measures are set
identically for the 8 bottles.
If the 8 bottles do not all have the same settings,
the measures shall be indicated below each of
the bottles (the smallest measure at the top, the
largest measure at the bottom)
4
x1
4
1
4
ACTIONS POSSIBLE FROM SCREEN 1 OF THE SETTINGS MENU
To configure bottles in use (name & volume), to
replace a bottle with another label or to remove a
bottle from the equipment
Setting the volume of the 3 measures per wine
dispensing tap and the price per measure
Setting the temperatures of the 2 compartments
Choice of compartment and wine dispensing tap
lighting: selection of colours and light intensity
Changing to Manual Mode
– Warnings are disabled. N.B.: if there is a leak,
you will not be informed.
– The measure control and statistics functions
will be disabled: it will then be necessary to
press and hold down the button to obtain the
required measure.
ACTIONS POSSIBLE FROM SCREEN 2 OF THE SETTINGS MENU
SELF SERVICE
Changing your "Manager" and/or "Waiter"
password
Configuring the date and time
If you are connecting the Vin au Verre 8.0 to
your cash desk. To do so, contact the appliance's
stockist
Return to factory settings: all your settings will
be deleted, the appliance is reset
To set:
• Language
• Unit of volume (centilitre, ounce)
• Currency
• Unit of temperature (Degree Celsius,
Fahrenheit)
Changing to "Self-Service" mode with external
card reader. For this appliance configuration,
contact the appliance's stockist.
To carry out daily or monthly cleaning of your
equipment.
Calibration for first use of the appliance.
This process can also be repeated if the appliance
is moved or if there is a measuring accuracy fault.
Statistics: to consult the turnover and volumes
served per label for a given period
Access to the second screen of the Settings Menu
Return to the welcome screen
• Access to the online help platform
Return to screen 1 of the Settings Menu
Return to the welcome screen
• Access to the online help platform
Standby mode
To customise your standby screen, contact your
stockist.
If you opted for installation in "identity check"
configuration
EN
-11-