EUROM Force 2501 Mode D'emploi page 55

Problem
The device starts
but does not supply
water.
Cleaning
CAUTION
Do not use:
•
•
•
Prevent water from entering the device. Do not immerse any part of the device
in water or other liquids.
It is recommended to clean the device every two weeks and prior to storage. Keep in mind
that the water, weather, air pollution, salty environment, smoke, etc. will leave their marks on
the device over time.
1. Wipe the device with a damp, clean, soft, lint-free cloth, or a soft brush.
2. Let the device dry completely prior to use and storage.
Disposal
At its end of life, discard the device according to the local laws and
regulations, or deliver the device to your supplier.
Cause
Pump, hose or
accessories are
frozen.
No water supply.
Filter blocked.
Nozzle blocked.
scouring pads;
hard brushes;
flammable, aggressive, or chemical cleaning products.
Solution
Allow them to thaw
and check them.
Ensure that there is
a water supply.
Clean the filter.
Clean the nozzle.
Safety instruction
Do not use the
device.
Make sure the
device is off while
checking the water
supply.
Make sure the
device is off and
drained.
Make sure the
device is off and
drained.
55