EUROM Force 2501 Mode D'emploi page 47

CAUTION
When you stop temporary:
•
•
•
1. Hold the jet gun (Figure 6, pos. 7) with both hands.
2. Aim the jet gun at the object that needs to be cleaned.
3. Squeeze the trigger (Figure 7, pos. 2) and start cleaning.
Cleaning with floor cleaner
1. Hold the jet gun (Figure 6, pos. 7) with both hands.
2. Place the floor cleaner (Figure 6, pos. 3) on the surface the be cleaned.
3. Squeeze the trigger (Figure 7, pos. 2) and start cleaning.
Change jet angle
CAUTION
The jet angle can only be changed of the adjustable nozzle. The turbo nozzle
and floor cleaner have a fixed jet angle.
1. If applicable, release the trigger
(Figure 7, pos. 2).
2. Lock the safety lock under the trigger
(Figure 7, pos. 1).
3. Rotate the head of the nozzle
(Figure 17, pos. 1) to change the jet angle:
•
for a smaller (more powerful jet) turn it
clockwise (Figure 17, pos. 2).
•
for a bigger (less powerful jet) turn it anti-
clockwise (Figure 17, pos. 1).
turn the device off;
close the external water connection;
remove the power plug.
Figure 17
47