EUROM Force 2501 Mode D'emploi page 34

Safety provisions
Safety systems are for the purpose of protecting the user and may not be altered.
•
The ON/OFF switch prevents unintended operation of the device.
•
The jet gun is equipped with a lock. This lock locks the gun and prevents unintended
engagement of the device.
•
As soon as the trigger of the jet gun is loosened, the pressure switch switches off the
pump and the high-pressure jet stops. The pump is re-engaged when the trigger is
squeezed.
•
The motor is equipped with a thermal protection, which switches off the motor in case
of overheating. In principle, the motor restarts by itself after it has cooled down
sufficiently. However, it is better to switch off the device and then wait 5 minutes before
re-starting. Find out why the device had overheated and then fix the problem. If it
recurs, then do not continue using the device and contact your supplier/service
provider.
•
The motor protection switches off the device if the power consumption is high.
34