EUROM Force 2501 Mode D'emploi page 52

1. Make sure the device is off.
2. Remove the water supply.
3. Unscrew the garden hose coupling
(Figure 23, pos. 2).
4. Pull out the filter (Figure 23, pos. 1).
5. Clean the filter under running water.
6. Put back the filter.
7. Put back the water garden hose coupling.
Clean the nozzle(s)
1. Make sure the device is off.
2. Remove the water supply.
3. Remove the nozzle (Figure 24, pos. 2) from
the jet gun (Figure 6, pos. 7).
4. Clean the nozzle with the cleaning pin
(Figure 24, pos. 1).
5. Flush it thoroughly (against the direction of
the high-pressure jet).
52
Figure 23
Figure 24