EUROM Force 2501 Mode D'emploi page 43

Installation
CAUTION
Place the cleaner as close as possible to the water supply.
CAUTION
The cleaner must be placed upright on a solid, flat and horizontal surface
(handle on top).
CAUTION
Put the power plug into an earthed wall socket that is easily accessible.
Main body
CAUTION
The water hose and female water coupling are not included.
1. Make sure the device is correctly assembled.
2. Make sure the ON(I)/OFF(0) switch
(Figure 11, pos. 3) is in the OFF(0) position.
3. Put the power plug into an earthed wall
socket that is easily accessible.
4. Connect the water supply to the device
(Figure 11, pos. 2).
5. You will hear a
is correctly connected.
'click' when the water supply
Figure 11
43