Hettich EBA 270 Mode D'emploi page 55

5.4 Switching the centrifuge on and off.
Switching the centrifuge on
Switching off the centrifuge
6 Operation
6.1 Opening and closing the lid
Opening the lid
Closing the lid
6.2 Removing and installing the rotor
Removing the rotor
AB2300en
2. Check whether the mains voltage matches the specification on the
rating plate.
3. Connect the device to a standard mains socket using the mains
cable.
Personnel:
■
Trained user
Set the mains switch to
�� The buttons flash, depending on the centrifuge type.
The last centrifugation data used is displayed.
The rotor is stationary.
Set the mains switch to
Personnel:
■
Trained user
The centrifuge is switched on.
The rotor is stationary.
[OPEN] button.
1. Press the
'Lid open' indicator appears.
�� The
2. Open the lid.
NOTICE
Damage to the device caused by the lid slamming.
−
Close the lid slowly.
−
Do not slam the lid.
Personnel:
■
Trained user
Close the lid and press the front edge of the lid down gently.
'Lid closed' indicator appears.
�� The
Personnel:
■
Trained user
Rev.: 12 / 10.2023
[I] .
[0] .
Operation
19 / 32