Publicité
Les langues disponibles
Les langues disponibles
Device overview
Fig. 10: [STOP] button
Fig. 11: [RPMx100] buttons
Fig. 12: [t] buttons
3.6
Original spare parts
3.7
Scope of delivery
3.8
Returns
14 / 32
■
End the centrifugation run.
The rotor ramps down to a stop at the preselected brake level.
■
Save brake level.
■
A numerical value from 500 RPM to the maximum rotor speed can be
set.
Adjustable in increments of 100 (RPM = displayed value x 100).
■
Indicator brake level.
■
Enter runtime.
■
Brake level 0 or 1.
Use only original spare parts from the manufacturer and approved accesso-
ries.
The following accessories are supplied with the centrifuge:
■
2 Fuse link
■
1 Release pin
■
1 single-end open-ended spanner (10 mm AF)
■
1 right-angled hex key (5 mm)
■
1 hex key (SW5 x 100)
■
1 power cable
■
1 Rotor
■
6 sleeves, 10 ml
■
6 sleeves, 15 ml
■
1 user manual
■
1 instruction sheet, transport lock
Rotors and the corresponding accessories are supplied depending on the
order.
An original Return Material Authorisation (RMA) form from the manufacturer
must always be requested for a return. Secure and reliable acceptance and
booking in of the goods with the manufacturer is not possible without an
original RMA form from the manufacturer. The Return Material Authorisation
(RMA) form contains a Declaration of No Objection (UBE), which must be
completed in full and enclosed with the return.
Rev.: 12 / 10.2023
AB2300en
Publicité
