Burkert 8025 Notice D'utilisation page 55

3 INSTALLATION
3.5. Electrical Connections for a Supply Voltage of 230/115 VAC (option)
Remove the cover from the unit. The power supply card is in the bottom of the housing.
Pull the cable through a PG 13.5 gland and make connections according to fig. 3.6.
The other connections will be the same as on the standard version.
Sensor connection
Fig. 3.6 Connection Diagram for 230 V /115 V AC Supply voltage
Important: In this version it is not possible to use the driver unit power supply for
!
the binary data inputs and the indicator lamp output (open collector).
BATCH CONTROLLER 8025
230/115 VAC
E-12-
8025-BATCH-**