Introduction; User's Responsibility For Safety; Unpacking And Control; Electromagnetic Compatibility - Burkert 8025 Notice D'utilisation

1 INTRODUCTION

Dear Customer,
Congratulations on your purchase of our
type 8025 batch controller.
BEFORE INSTALLING OR USING THIS
PRODUCT, PLEASE TAKE OUR ADVICE
AND READ THE ENTIRE MANUAL
THOROUGHLY.
This will enable you to fully profit from all of
the advantages offered by this product.

1.1 Unpacking and Control

Please verify that the product is complete
and free from any damage. The standard
delivery must include:
-1 8025 digital batch controller, either in
compact version, or in panel version with
mounting acessories (1 gasket, 4 spacer
bolts, 1 protective plate, 4 screws, 4
lockwashers, 2 cable clips and 1 cut-away
film), or in IP65 wall-mount version.
-1 Manual 8025 batch controller
-1 Manual Fitting S020/1500/1501
Compare the Type specifications on the
label to the adjacent list to ensure that you
have received the proper unit. If there is any
loss or damage, please contact your local
Bürkert subsidiary.
1.2 About this Manual
This manual does not contain any warranty
statement. Please refer to our general terms
of sale and delivery.
Only properly-trained staff should install and/
or repair this product. If difficulties
should occur at the time of installation,
please contact your nearest Bürkert sales
office for assistance.
BATCH CONTROLLER 8025

1.3 User's Responsibility for Safety

Bürkert manufactures a broad range of batch
controllers. While each of these products is
designed to operate in a wide variety of
applications, it is the user's responsibility to
select a transmitter model that is appropriate
for the application, install it properly, and
maintain all components. Special attention
must be paid to the chemical resistance of
the transmitter against the fluids which are
directly contacting the product.
This symbol appears in the manual
to call special attention to
instructions that affect the safe
!
installation, function and use of the
product.

1.4 Electromagnetic compatibility

This device conforms to the EMC-Directive
of the Council of European Communities
89/336/EEC.
In order to comply with this directive, the
wiring instructions must be followed.
E-2-
8025-BATCH-**