Publicité
Les langues disponibles
Les langues disponibles
7. DESCRIPTION OF THE CONTROL
PANEL.
The menu tree and operating described in this section
•
corresponds to equipments with alphanumerical panel
only.
For units with touch screen make the respective counterpart ac-
tions, while the procedure is easier due to the grouping of the dif-
ferent steps to follow in only screen or to a more direct operating.
Interact as the EL064*01 user's manual states.
7.1. CONTROL PANEL PARTS.
(1)
LED indicators:
(a) Rectifier input voltage OK (green).
(b) Equipment on bypass (orange).
(c) Inverter ON (green).
(d) Equipment running from batteries -mains failure-
(red).
(e) In case of any alarm of the equipment (red).
(2)
LCD screen.
(3)
Keypad
ENT
«Enter» key. Confirmation of orders, program values (or
other specified functions)
()
«Left» key for submenu navigation, or cursor moving.
()
«Right» key for submenu navigation, or cursor moving.
()
«Up» key for menu navigation, or character modification.
()
«Down» key menu navigation, or character modification.
ESC
«Escape» key. Return to main screen, cancel/finish pro-
gramming (or other specified functions).
(1):
(a)
(b)
PEAK SHAVING
(2)
Fig. 47. Control panel parts, according to the model
USER'S MANUAL
(c)
(d)
(e)
(3)
7.2. BASIC FUNCTIONS OF THE SYNOPTIC
KEYPAD.
Through keys advance () and return (), there is access to
•
all the menus of the LCD panel, being able to move from one
to another.
Through keys right () or left (), there is access to the
•
screens of all the submenus of the LCD panel, being able to
move from one to another with themselves.
Key (ENT), has different purposes depending on the menu we
•
are:
Setting values. Press key (ENT) to activate the setting
ˆ
function, the figures in the screen blink. With keys ()-
() the character to set is selected and with keys ()-
() the value is selected. To confirm press (ENT). Next
field will blink, to continue doing settings proceed in the
same way or press (ESC) to return to no-setting situation.
Validation of orders or commands.
ˆ
When pressing key (ESC) from any screen of any submenu, it
•
is gone back to main screen (Screen 0.0), unless we are in any
screen of «Parameters» menu and setting any of them. If so,
the first pulsation of key (ESC) will stop blinking the value, and
second one will go back to main screen.
Notes related with the screen map (see Fig. 42):
•
Some screens have a certain number of «–» characters.
ˆ
Each one of it, means one character, so the maximum
length of the field will be determined by the quantity of
them.
Each screen is labelled with a number located in its right
ˆ
bottom corner. It is only included as a mere reference for
its next description and explanation.
Note (*1): it means the hidden programming screens
ˆ
through password (*****) in «screen 1....». This safety
level avoids that non-authorised staff can alter or
modify any setting
<ENT> TO CONFIRM
<ESC> TO CANCEL
(*1)
Safety
level
7.2.1. Messages menus and classification of the
submenus.
Use () and () keys to choose between different menus
•
(0.0, 1.0, ..., 7.0).
Use () and () keys to move inside submenu screens.
•
SLC CUBE3+ PS UNINTERRUMPTIBLE POWER SOURCE
screen 1.2
Screen
numbering
137
Publicité
