Hettich ROTOFIX 32 A Mode D'emploi page 78

Troubleshooting
9.4 Replacing the mains input fuse
36 / 39
WARNING
Risk of electric shock due to maintenance and servicing
work on live device.
−
Disconnect the device from the mains before carrying
out repairs and maintenance.
WARNING
Danger of cutting and crushing due to moving rotor.
−
Do not open the lid until the rotor has stopped.
Personnel:
■
Trained user
1
Fig. 20: Emergency release
1 Release pin
2 Hole
1. Look through the window in the lid to ensure that the rotor is sta-
tionary.
2. Insert the release pin (
the handle strip can be swivelled upwards when the pin is pressed
down.
3. Open the lid.
WARNING
Risk of electric shock due to maintenance and servicing
work on live device.
−
Disconnect the device from the mains before carrying
out repairs and maintenance.
Personnel:
■
Trained user
Rev.: 17 / 01.2024
1 ) horizontally into the hole ( 2 ). Push it in until
2
AB1206en