Hettich ROTOFIX 32 A Mode D'emploi page 51

3 Device overview
3.1 Technical data
Manufacturer
Model
Type
Mains voltage (±10%)
Mains frequency
power consumption
Power consumption
max. capacity
max. permissible density
max. speed (RPM)
max. acceleration (RCF)
max. kinetic energy
AB1206en
NOTICE
Damage to the device electronics due to incorrect voltage or
frequency at the device circuit breaker.
−
NOTICE
Damage to the device and samples due to premature pro-
gram termination.
Premature program termination is caused by power failure,
switching off during the program or pulling out the mains
plug.
−
−
−
Andreas Hettich GmbH & Co. KG,
D-78532 Tuttlingen
ROTOFIX 32 A
1206
1206-34
208-240 V 1～
50-60 Hz
300 VA
1.4 A
4 x 100 ml / 32 x 15 ml
1.2 kg/dm³
6000
4226
3160 Nm
Rev.: 17 / 01.2024
Operate the device with the correct mains voltage and
mains frequency.
The value can be found in the technical data and on the
rating plate.
Do not switch off the device while the program is run-
ning.
Do not trigger the emergency release on the device
while the program is running.
Do not pull out the mains plug while the program is
running.
1206-01
1206-33
100-127 V 1～
50-60 Hz
300 VA
3.0 A
Device overview
9 / 39