Hettich ROTOFIX 32 A Mode D'emploi page 59

5 Commissioning
5.1 Unpacking the centrifuge
5.2 Removing the transport lock
AB1206en
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
−
Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
CAUTION
Risk of injury from lifting heavy loads.
−
Provide an adequate number of helpers.
−
Note the weight. See ⮫
on page 9 .
NOTICE
Damage to the device due to improper lifting.
−
Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■
Trained user
1. If present: Remove the packaging tapes.
2. Lift the box up and remove the padding.
3. Remove the accessories and store them safely.
4. Place the device on a stable and level surface.
Personnel:
■
Trained user
The lid is closed.
The mains cable is disconnected from the device.
Rev.: 17 / 01.2024
Commissioning
Chapter 3.1 'Technical data'
17 / 39