Hettich ROTOFIX 32 A Mode D'emploi page 72

Cleaning and care
7.3.1.2 Setting an audible signal
8 Cleaning and care
8.1 Overview table
Chap. Task to execute
8 Cleaning and care
8.3 Cleaning
8.3 Cleaning the device
8.3 Cleaning biosafety systems
8.3 Cleaning accessories
8.4 Disinfection
8.4 Disinfecting the device
8.4 Disinfecting the accessories
8.5 Maintenance
8.5 Greasing the rubber seal of the centrifuging
chamber
8.5 Greasing the rubber seal of the biosafety system
8.5 Trunnion greasing
8.5 Checking the accessories
8.5 Checking the biosafety system
8.5 Centrifuging chamber damage inspection
8.5 Greasing the motor shaft
8.5 Accessories with a limited service life
30 / 39
1. Switch off the mains switch.
2. Press and hold down the ▲
[IMPULSE] button simultaneously.
3. Switch on the mains switch and release the buttons.
[RPM/RCF x 100] button repeatedly until 'BEL 1' or 'BEL
4. Press the ▲
0' is displayed.
[t] buttons beneath the time indicator to set '0' or '1 ' .
5. Use the
0 = audible signal disabled.
1 = audible signal enabled.
[STOP] button to save the settings.
6. Press the
Rev.: 17 / 01.2024
[RPM/RCF x 100] button and the
X
X
X
X
X
X
X
X
X
X
X
30
31
31
31
32
32
32
32
33
33
33
33
33
33
X 33
X 33
33
AB1206en