Hettich ROTOFIX 32 A Mode D'emploi page 58

Transport and storage
Storage conditions
4.2 Fastening the transport lock
16 / 39
■
When transporting using a transport aid (e.g., a pallet truck), the trans-
port aid must be able to carry at least 1.6 times the transport weight of
the device.
■
Secure the device to prevent it tipping over and falling down during
transport.
■
Never transport the device sideways or upside down.
■
The device must be stored in the original packaging.
■
Only store the device in dry rooms.
■
The storage temperature must be between -20 °C and +60 °C.
■
Humidity must not be condensing. Humidity must be between 10% and
80%.
Personnel:
■
Trained user
The lid is closed.
The mains cable is disconnected from the device.
1
2
3
Fig. 13: Transport lock
1 Transport lock
2 Spacer sleeves
3 Screws
1. Tilt the device on the back of the device.
2. Insert 3 transport locks (
3. Screw in 3 screws (
Rev.: 17 / 01.2024
2
2
1 ).
3 ) with spacer sleeves ( 2 ).
3
2 3
AB1206en
1