ResMed AirCurve 11 VAUTO Mode D'emploi page 6

At a glance
WARNING
Use only recommended ResMed masks and accessories or other vented masks as recommended by
the prescribing doctor with this device. Using these components allows normal breathing and
prevents potential asphyxiation.
The AirCurve 11 system includes the following:
•
Device
•
HumidAir 11 Standard tub
•
HumidAir 11 Cleanable tub
•
ClimateLineAir 11 heated tubing or SlimLine™ tubing
•
Air 11™ Power supply unit: 90W AC adaptor
•
Travel bag
•
SD card (not available in all devices).
Contact your care provider or refer to the ResMed website (ResMed.com/productsupport) for a range of
spares and compatible accessories available for use with the device including:
•
Air tubing (ClimateLineAir 11, SlimLine, Standard 2m and Standard 3m)
•
HumidAir 11 Standard tub (Single patient re-use - cannot be reprocessed)
•
HumidAir 11 Cleanable tub (Multi patient re-use - can be reprocessed)
•
Side cover which allows use without the humidifier tub
•
Air11 Filter - standard
• Air11 Filter - hypoallergenic
•
Air11 DC/DC converter
•
SD card
• SD card cover
Notes:
•
The AirCurve 11 device is compatible with ResMed masks. For a complete list, see the Mask/Device
compatibility list on ResMed.com/downloads/devices.
•
The HumidAir 11 Standard tub and the HumidAir 11 Cleanable tub are the only water tubs used with
the AirCurve 11 device.
•
The ClimateLineAir 11 is the only heated tubing that is compatible with the AirCurve 11 device.
•
This device is suitable for use with the Air11 90W AC power supply unit and 90W DC-DC converter.
The Air11 65W AC Adaptor can be used with the AirCurve 11 device but there may be some
degradation of the humidifier performance when mouth or mask leak is present.
•
To reduce the likelihood of disconnection and to prevent adverse ventilator performance use only
accessories compatible with the ventilator. Compatibility is determined by reviewing the instructions for
use of either the ventilator or the accessories.
English 3