ResMed AirCurve 11 VAUTO Mode D'emploi page 15

Starting/Stopping therapy
WARNING
The machine is not intended to be operated by persons (including children) with reduced physical,
sensory or mental capabilities without adequate supervision by a person responsible for the
patient's safety.
To start therapy:
1. Fit your mask
2. Press the Start Therapy/ Standby button or breathe normally if SmartStart is enabled
Therapy will begin and the treatment screen is displayed. A dynamic pulse wave will appear during
therapy.
To review your sleep progress, click on
Notes:
•
The screen will fade and then go black automatically after a short period of time. Tap the screen to turn
it back on.
•
If power is interrupted during therapy, the device will automatically restart therapy when power is
restored.
•
The device has a light sensor that adjusts the screen brightness based on the light in the room.
To stop therapy:
1. Remove your mask.
2. Press the Start Therapy/ Standby button or wait until the device stops if SmartStop is enabled.
My Sleep View
Last night's sleep data can be found under MY SLEEP VIEW.
More detailed data can be found in myAir (if available). If enabled by your care professional, additional data
may be found by tapping on
12
to view more details
USAGE: displays HOURS USED LAST NIGHT
EVENTS: displays the number of apnea and hypopnea events per
hour of sleep.
MASK: displays information on the mask seal. A yellow mark on this
icon indicates there is information to view on the mask seal. Tap
MASK to see more.
.