ResMed AirCurve 11 VAUTO Mode D'emploi page 22

4. Connect the air tubing firmly to the air outlet located on the rear of the device.
5. Open the humidifier tub and fill it with water up to the maximum water level mark.
•
If using the HumidAir 11 Standard water tub, use distilled water only
• If using the HumidAir 11 Cleanable water tub, use drinking quality water (potable)
6. Close the humidifier tub and insert it into the side of the device.
7. Connect the free end of the air tubing firmly onto the assembled mask.
For further assistance, refer to Setting up your device.
Traveling
You can take your device with you wherever you go. Just keep the following in mind:
•
Use the travel bag provided to prevent damage to the device.
•
Empty the humidifier tub and pack it separately in the travel bag.
•
Make sure you have the appropriate power cord for the region you are traveling to. For information on
purchasing, contact your care provider.
Traveling by plane
WARNING
•
Do not use the device with water in the humidifier tub while in transit (eg, on a plane or vehicle)
due to the risk of:
•
water spilling into the device
•
the inhalation of water during turbulence.
•
Make sure that the humidifier tub is empty before transporting the device.
Your AirCurve 11 device may be taken on board as carry-on luggage. Medical devices do not count toward
your carry-on luggage limit.
You can use your AirCurve 11 device on a plane as it meets the Federal Aviation Administration (FAA)
requirements. Air travel compliance letters can be downloaded and printed from www.resmed.com.
When using the device on a plane:
• Make sure the humidifier tub is empty and inserted into your device. The device will not work without
the humidifier tub or side cover inserted.
•
Make sure the device is switched to airplane mode when required by airline staff.
To turn on Airplane mode:
1. From the Home screen, tap MORE.
2. Swipe through the menu to locate Airplane Mode.
3. Tap Airplane Mode to switch it on.
English 19