Télécharger Imprimer la page

ResMed AirCurve 11 VAUTO Mode D'emploi page 27

Masquer les pouces Voir aussi pour AirCurve 11 VAUTO:

Publicité

Les langues disponibles

Les langues disponibles

Sound
Declared dual-number noise emission values in accordance with ISO 4871:1996
Device with standard air tubing and side cover as measured according to ISO 80601-2-70:2020 and ISO 80601-2-79:2018
Sound pressure level
Sound power level
Device with standard air tubing and HumidAir 11 humidifier tub (HumidAir 11 humidifier tub half-filled) as measured according to
ISO 80601-2-70:2020, ISO 80601-2-74:2021 and ISO 80601-2-79:2018
Sound pressure level
Sound power level
Physical Dimensions
Dimensions (H x W x D) with HumidAir 11 humidifier tub:
Dimensions (H x W x D) with side cover:
Air outlet:
Weight - device and HumidAir 11 humidifier tub:
Weight - device with side cover:
Housing construction:
Hot plate - Material:
Water capacity:
Time between each refill of the humidifier tub:
Humidifier tub - Material:
90W power supply unit
Input range
DC output:
Typical power consumption:
Peak power consumption:
Class of equipment
Environmental conditions
Operating temperature
Operating humidity
Operating altitude
Storage pressure/Storage altitude
Storage and transport temperature
Storage and transport humidity
Air Filter
Standard:
Hypoallergenic:
24
26 dBA with uncertainty of 2 dBA
34 dBA with uncertainty of 2 dBA
27 dBA with uncertainty of 2 dBA
35 dBA with uncertainty of 2 dBA
3.72" x 10.21" x 5.45"
(94.5 mm x 259.4 mm x 138.5 mm)
3.72" x 9.32" x 5.45"
(94.5 mm x 236.8 mm x 138.5 mm)
The 22 mm conical outlet connector complies with EN ISO 5356-
1:2015
43 oz (1229 g)
44 oz (1236 g)
Flame retardant engineering thermoplastic
Stainless steel
380 mL
> 8 hours ±0.5 hours (tested at 23 ±2°C / 73.4 ± 3.6 °F)
Injection molded plastic, stainless steel and silicone seal
100-240 V, 50-60 Hz, 1.0-1.5 A
115 V, 400Hz, 1.5 A for aircraft use
24 V
3.75 A
65.3 W (72.5 VA)
103.4 W (109.9 VA)
Class ll
+41°F to +95°F (+5°C to +35°C)
Note: The airflow for breathing produced by this therapy device can
be higher than the room temperature. Under extreme ambient
temperature conditions (104°F/40°C) the device remains safe.
10 to 95% relative humidity, non-condensing
Sea level to 9,870' (3,010 m); air pressure range 1060 hPa to 700 hPa
1060 to 700 hPa
-13°F to +158°F (-25°C to +70°C)
5 to 95% relative humidity, non-condensing
Material: Polyester non woven fiber
Average arrestance: >75%, when tested to EN779.
Material: Blended synthetic fibers in a polypropylene carrier
Efficiency: >80% (average) when tested to EN13274-7.
Note: The use of a ResMed approved hypoallergenic filter will result
in a small reduction in the accuracy of the delivered pressure at high
leaks.

Publicité

loading

Ce manuel est également adapté pour:

Aircurve 11 sAircurve 11 asv