ResMed AirCurve 11 VAUTO Mode D'emploi page 14

Menu Function
MORE Run Warmup
Mask Fit
Device
Diagnostic
*Features enabled by an appropriate care professional.
Connecting your AirCurve 11 device and smart device
myAir is a smartphone app that guides you through the setup process. This includes device setup videos,
mask fitting videos, trying therapy using the Test Drive feature, and tracking your sleep health progress.
The app is not required to operate the AirCurve 11 device.
Before pairing the AirCurve 11 device to a smartphone, ensure the app's latest version is installed on the
smartphone. If not, download the app from the App Store
to your phone. To set up the app, go to the MORE menu.
1. Ensure your AirCurve 11 device is set up correctly and plugged into a power source.
2. Launch the myAir app. Tap Continue.
3. Follow the prompts on the myAir app to complete the Bluetooth connection.
AirCurve 11 is now connected to the app. The Bluetooth connection symbol appears on the status bar
to confirm the connection between the AirCurve 11 device and the smartphone.
4. Tap Save.
Description
This function will heat the water in the humidifier tub.
This function helps you assess and identify possible air leaks around your
mask.
Indicates good mask seal. Leak is less than 24L/min.
Adjust the mask. Leak is more than 24L/min.
When enabled, Device Diagnostics will analyze the functionality of the
device. See ResMed.com for further details.
Device Diagnostic can be set to run Daily, Weekly, every 2 weeks, or it can
be switched off.
® ®
or on Google Play . Pair the AirCurve 11 device
English 11