Bluetooth On/Off; Key Lock On; Device Information; Pump Kick - Wilo Stratos MAXO-D 32/0,5-12 Notice De Montage Et De Mise En Service

en
11.3

Bluetooth On/Off

11.4

Key lock on

11.5

Device information

11.6

Pump kick

198
Device settings
NOTICE
Units are set to SI units 1 as a factory setting.
Under "Settings"
1. "Device settings"
2. "Bluetooth On/Off"
you can switch Bluetooth on or off. When Bluetooth is switched on, the pump can
connect to other Bluetooth devices (e.g. Smartphone with Wilo App).
NOTICE
Bluetooth is switched on as a factory setting.
The key lock function prevents accidental change of pump parameters by unauthorised
persons.
Under "Settings"
1. "Device settings"
2. "Key lock On",
you can activate the key lock.
Simultaneous pressing (> 5 seconds) of back
the key lock.
NOTICE
You can also lock the keys using the digital inputs DI 1 and DI 2 (see section "Applic-
ation and function of the digital control inputs DI1 and DI2 [} 181]").
If the key lock was activated through digital inputs DI 1 or DI 2, the deactivation can
be done only through the digital inputs! A button combination is not possible!
The Home screen and warning as well as error messages are also displayed when the
key lock is active so you can monitor the pump status.
A lock symbol indicates an activated key lock.
Under "Settings"
1. "Device settings"
2. "Device information"
you can read information about product names, the product and serial number as
well as software and hardware version.
In order to prevent blocking of the pump, a pump kick is set on the pump. After a set
time interval, the pump starts and switches off after a short time.
Prerequisite:
For the pump kick function, the mains voltage must not be interrupted.
CAUTION
Blockage of the pump due to long downtimes!
Long downtimes may lead to blockage of the pump. Do not deactivate pump kick!
and context button deactivates
WILO SE 2018-11