Wilo Stratos MAXO-D 32/0,5-12 Notice De Montage Et De Mise En Service page 163

Installation and operating instructions Wilo-Stratos MAXO/-D/-Z
Setting the control functions
Set auto control
Settings assistant
Current: Radiator – Dynamic Adapt plus
Setback operation
Detection: Switched off
Emergency operation speed
Constant speed: 2000 rpm
Pump ON/OFF
The pump is: Motor Off
Fig. 49: Settings assistant
Direct selection of a basic control mode
In the "Settings" menu, select
1. "Set auto control"
2. "Settings assistant"
3. "Basic control modes".
Application
Heating
Cooling
Heating & cooling
Drinking water
Basic control modes
Fig. 50: Application selection "Basic control modes"
The following basic control modes are available:
Basic control modes
‣ Differential pressure ∆p-c
‣ Differential pressure ∆p-v
‣ Index circuit ∆p-c
‣ Dynamic Adapt plus
‣ Volume flow Q-const
‣ Multi-Flow Adaptation
Temperature T-const
‣ Temperature ∆T-const
‣ Speed n-const
‣ PID control
Table 20: Basic control modes
en
Select a control mode via
the application and
system type.
All control modes
are also available to be selected
directly.
Select control mode
directly, no
application
allocated.
Settings help
163