Sentiotec home.com4 BLACK RS485 Mode D'emploi page 60

Instructions for installation and use
15. Technical data
Ambient conditions
Storage temperature:
Ambient temperature:
Air humidity:
Sauna control unit
Dimensions (W × H × D):
Voltage rating/three-phase 3N:
Frequency:
Standby power consumption:
Power rating/heater:
Max. switching capacity / vaporizer:
Max. switching capacity / additional output (dimmable)* 500 W / 4 A
Max. switching capacity / additional output (switchable)* 3.5 kW / 16 A
Rated voltage:
Protection class (protected against splashing water):
Connection to the mains supply as fixed wiring (fixed connection)
Light / fan
Power rating:
Fuse:
Setting ranges
Temperature:
Humidity:
The maximum humidity that can be set depends on the temperature of the
sauna. The higher the sauna temperature, the lower the maximum humidity
level which can be set (see standard curve, page 39)
Thermal safety
Heater sensor with overheat cut-out (139 °C cut-out temperature)
Adjustable automatic heating period (6 h, 12 h, 18 h, 24 h)*
Optional single-sensor mode or two-sensor mode
p. 60/62
-25 °C to +70 °C
-10 °C to +40 °C
max. 95%
210 x 294 x 53
400 V AC / 50 Hz
50 Hz
8 W
3 x 3.5 kW / 16 A
3.5 kW / 16 A
230 V
IPX4
100 W
1A T
30 °C to 110 °C
0 % to 100 %