Sentiotec home.com4 BLACK RS485 Mode D'emploi page 42

Instructions for use for the user
10.10. ECO mode
The ECO function allows you to save energy in breaks between sauna
sessions. When the ECO function is activated, the connected devices
run with reduced power. You can choose between a 20, 40 or 60-minute
sauna break.
The sauna heater and the vaporizer are switched on again before the
end of the break. In this way the preset temperature and preset humidity
are reached again at the end of the sauna break.
Perform the following steps to activate the Eco-function:
1. Use rotary selector 1 to select the ECO icon. Then press briefly
to open the submenu.
► The "ECO mode" submenu opens and the last break time set
appears underlined on the display.
2. Press rotary selector to change the break time.
► The value is now highlighted in green and can be changed.
► The display is in minutes.
3. There are three different break times available:
● 20-minute sauna break.
● 40-minute sauna break.
● 60-minute sauna break.
► Press the rotary selector again to confirm the setting.
4. Move the cursor (underscore) to the right to "Start" and briefly press
the rotary selector.
► The sauna break is started.
► The remaining break time appears on the display.
► Rotary selector 1 starts to flash slowly.
5. To cancel the sauna break, press rotary selector 1 and simultane-
ously turn it to the right.
p. 42/62