Sentiotec home.com4 BLACK RS485 Mode D'emploi page 46

Instructions for use for the user
Accessing user program:
3. Use rotary selector 1 to select the user programs icon. Then press
briefly to open the submenu.
► The "User programs" submenu opens and the display shows the
last user program underlined.
4. Press the rotary knob again to use another user program.
► The value is now highlighted in green and can be changed.
► There are five user programs available [1–5]
► Press the rotary selector again to confirm the setting.
5. Move the cursor (underscore) to the right to "Start" and briefly press
the rotary selector.
► The user program is started.
Creating your own user programs:
You can create user programs as you would like. A preset user program
is overwritten in the process. Perform the following steps:
1. Start all functions that are to be switched on with the user program.
2. Use rotary selector 1 to select the user programs icon. Then press
briefly to open the submenu.
3. Move the cursor (underscore) to the left to "Save" and briefly press
the rotary selector.
► The settings are stored in the selected user program.
► To switch off user programs, use the All Off function.
p. 46/62