Sentiotec home.com4 BLACK RS485 Mode D'emploi page 37

Instructions for use for the user
10.3. Sauna mode
Starting sauna mode
1. Use rotary selector 1 to select the temperature icon. Then press
it briefly to confirm.
► The "Temperature" submenu opens and the setpoint value for
the temperature appears underlined in the display.
2. Press rotary selector to change the value.
► The value is now highlighted in green and can be changed.
► Press the rotary selector again to confirm the setting.
3. Move the cursor (underscore) to the right to "On" and briefly press
the rotary selector.
► The sauna heater is switched on and begins to heat up.
► The colour of the temperature icon in the notification area chang-
es to red.
► You automatically exit the "Temperature" menu item.
Switching off sauna mode
4. To switch off the heater, repeat items 1 and 3.
► Instead of "On", "Off" is displayed.
► To exit the submenu, move the cursor to the "Back" icon on the
left and confirm with the rotary selector.
Back
Target value (with cursor)
On/Off
View of temperature submenu
On
p. 37/62
EN