Sentiotec home.com4 BLACK RS485 Mode D'emploi page 43

Instructions for use for the user
10.11. Weekly timer
The weekly timer allows you to automatically switch the sauna control
unit on and off at specific times, on certain days of the week and with
any operating mode. Up to 14 independent On/Off operations can be
programmed. Manual operation of the sauna control unit is unrestricted
during this time.
Follow these steps to create a weekly timer program:
1. Use rotary selector 1 to select the weekly timer icon. Then press
briefly to open the submenu.
► The "Weekly timer" submenu opens and the following menu items
appear on the display:
● Timer no. [1–14]
► You can assign any timer number from 1 to 14 to each On/Off cycle.
● Days of the week [Mon–Sun]
► Here you can set the days of the week on which the current
program is to be executed. Every day from Monday to Sunday
is available individually, along with groups of Monday to Sunday,
Monday to Friday and Saturday to Sunday.
● Start time [00:00–23:59]
► Here you set the time at which the program is to start.
● End time [00:00–23:59]
► Here you set the time at which the program is to switch off.
The maximum runtime, which has been set in the technician menu, limits
the time between switch-on and switch-off. If necessary, correct the setting
for the maximum runtime in the technician menu.
p. 43/62
EN