Sentiotec home.com4 BLACK RS485 Mode D'emploi page 19

Installation instructions, only for experts
5. Electrical connection
ATTENTION!
Damage to the unit
● The sauna control unit may only be used for operating and controlling 3 heat-
ing circuits with a maximum heating capacity of 3.5 kW per heating circuit.
The maximum vaporizer output is 3.5 kW. The maximum additional output
capacity is 3.5 kW.
1
7
Cable gland for FTS2 sensor, RS485 BUS line
1
Cable gland for F1 sensor, F2 sensor and safety cut-off
2
Cable gland for vaporizer cable
3
Cable gland for heater cable
4
Cable gland for power supply cable
5
Cable gland for light and fan
6
Cable gland for loudspeaker cables and DMX cable
7
Cable gland for remote start and foil sensor
8
Cable gland for additional output
9
Cable gland for power booster
a
Ground busbar
b
2 3
8 9
4 5
b
a
p. 19/62
6
EN