Angelo Po FX 201 E3 Manuel D'utilisation Et D'installation page 102

If preheating has to be ended prematurely, press the
button.
To modify the preheating temperature, press the but-
ton and proceed as described on page 18.
4 – Place the foods for cooking inside the cooking
chamber and close the door to start the cooking cycle.
The display will show page.
Important
The light inside the cooking
chamber remains on through-
out the cycle to allow the food to
be viewed.
5 – To feed steam into the chamber while cooking is
in progress, press the button.
IT
GB
DE
6 – To display the temperature inside the chamber
FR
and the time set while cooking is in progress, press
the button.
ES
This function is active only if the "Multicooking"
function has not been activated.
Otherwise it will display the times of the "Multi-
cooking" function".
English
>>
>>
>>>
Cooking time/"Core" temperature
Percentage humidity or steam
Inizio ciclo cottura.tif
>>
>>
- 38 -
modify
temperature
manual cooking
Cooking time
Fan speed
time left
ECO/PLUS
vent percentage
modify
parameters
end preheating
Time
display
steam injection
measured data
steam
injection
display
measured data
Use and installation manual