haacon ESF Serie Manuel D'utilisation page 29

8.7.2 Operation via buttons in the lid of the control unit
Emergency
stop
Lowering / unreeling the rope
8.7.3 Operation via wall control unit
Lifting / reeling the rope
Lowering / unreeling the rope
Emergency stop
8.7.4 Operation via radio remote control
Contactor control version
Start transmitter
– Release the emergency stop at the bottom end.
– Start the control by pressing the "Start" buttons at the same
time (see illustration).
Acknowledge errors
Press the "lowering" button
Transmitter
"Horn"
button
Emergency stop
Receiver
094278_v_de_gb_fr_es_it_pt_eseilwi_s
Warning light (red)
Lifting / reeling the rope
Warning light (red)
Lifting /
reeling the rope
Lowering /
unreeling the rope
"Start" buttons
haacon hebetechnik gmbh – Telefon +49 (0) 9375 - 84-0 – Fax +49 (0) 9375 - 84-66
Frequency converter version
Start transmitter
– Release the emergency stop at the bottom end.
– Start the control by pressing the "Start" buttons at the same
time (see illustration).
Acknowledge errors
Press the "lowering" button
Transmitter
"Horn"
button
Emergency stop
Receiver
8.8 coil heater
Motors that are used in humid environments and/or under
strong temperature fluctuations can be supplied with a heating
element to protect against condensation water.
The single-phase supply (which is located in the terminal box)
is provided via an additional terminal strip.
Power consumption:
construction size
56 ... 80
90 ... 160
Modifications of the design and execution reserved.
never feed the coil heater during motor operation.
Lifting /
reeling the rope
Lowering /
unreeling the rope
Bypassing the end
position and slack rope
GB
(press and hold the
button for 3 seconds)
"Start" buttons
1~230V+10%
P [W]
10
25
29