Publicité
Les langues disponibles
Les langues disponibles
3 Operation
3.1 Set-up and startup
The following section describes the operating elements, connections and the
startup of the secretion aspirator Allegra M30:
3.1.1 Connecting the secretion aspirator Allegra M30
Known or identifiable conditions for medical care
within a domestic environment
•
Children and pets should be kept away from the device to ensure
that it cannot be knocked over or dropped.
•
Prior to connecting the power supply unit, ensure that the voltage
of the device corresponds to the domestic power supply.
•
Do not use the device in damp rooms where humidity is >90 %
(no condensation), in the bath or when showering (risk of electric
shock). Avoid wet conditions on power supply unit, control panel
and socket for the power supply unit. Never submerge the device
in water or other liquids (also not while it is switched off).
Check the power supply unit incl. mains cable for potential damages
EN
before each use and replace it if there is any damage.
58
All manuals and user guides at all-guides.com
Use the socket for the 12 V power supply unit (fig. 1(D)) to connect the device
to the mains power supply with the aid of the supplied power supply unit to
charge or operate it as needed. Make sure that the device is positioned in such
a way that it is possible to easily disconnect it later.
Information on the permissible environmental conditions during operation can
be found in section 7 "Technical data".
Fig. 2
Connection of the secretion aspirator Allegra M30 to patient and accessories
fingertip
suction tube
device with resuable
secretion canister
power supply unit
(type: GTM91099-
6015-3.0-T2)
mains cable
power outlet
aspiration catheter
patient
Publicité
